Pro Tect® Liquid Mask Tub Protection

Protection for Tubs and Baths

Scratching your tub can cost anywhere from $110 to over $175. For about $49 you can cover a 5' tub and rest a bit easier knowing your tub is protected. Our durable Pro Tect® Liquid Mask Tub Protection forms a "tough latex coating" over your tub, providing up to a 40 mil protection for tubs, showers, and other highly polished surfaces like porcelain, enamel, fiberglass, acrylic and glass.

How to Apply:

There are two main ways to put Pro Tect® Liquid Mask Tub Protection onto a tub or shower basin. You can paint or roll it on or use an airless sprayer. The most efficent way is to use an airless sprayer with over 2,500 psi. The Tub Protection Liquid Mask is a water-based product, so no chemicals are needed to flush it out of the sprayer. Know a painter, borrow his:) Open the 1 gallon or 5 gallon bucket, put the sprayer tubs in the Liquid Mask and spray start protecting your tubs. If you want apply Pro Tect® Liquid Mask Tub Protection by painting or rolling it on, there are some tricks and a "must do" to have success at protecting your tub. Make sure to apply 2 coats. It's important to apply a thick coat, which is essential when applying by hand when painting and rolling. You can get, Pro Tect's Tub Protection, thick enough on the flat surfaces, but the sides will run when the Liquid Mask is put on too thick. Start by applying a light coat. Come back when it has dried and apply another coat. You can always put more on so don't toss out any left overs.

Protection for Tubs and Baths

Scratching your tub can cost anywhere from $110 to over $175. For about $49 you can cover a 5' tub and rest a bit easier knowing your tub is protected. Our durable Pro Tect® Liquid Mask Tub Protection forms a "tough latex coating" over your tub, providing up to a 40 mil protection for tubs, showers, and other highly polished surfaces like porcelain, enamel, fiberglass, acrylic and glass.

How to Apply:

There are two main ways to put Pro Tect® Liquid Mask Tub Protection onto a tub or shower basin. You can paint or roll it on or use an airless sprayer. The most efficent way is to use an airless sprayer with over 2,500 psi. The Tub Protection Liquid Mask is a water-based product, so no chemicals are needed to flush it out of the sprayer. Know a painter, borrow his:) Open the 1 gallon or 5 gallon bucket, put the sprayer tubs in the Liquid Mask and spray start protecting your tubs. If you want apply Pro Tect® Liquid Mask Tub Protection by painting or rolling it on, there are some tricks and a "must do" to have success at protecting your tub. Make sure to apply 2 coats. It's important to apply a thick coat, which is essential when applying by hand when painting and rolling. You can get, Pro Tect's Tub Protection, thick enough on the flat surfaces, but the sides will run when the Liquid Mask is put on too thick. Start by applying a light coat. Come back when it has dried and apply another coat. You can always put more on so don't toss out any left overs.