Faq website

Frequently Asked Questions

Everything you need to know about Pro-Tect Finished Floor Guard — a breathable, reusable temporary floor protection with a latex grip backing that uses no tape and no adhesive on hardwood, tile, granite, marble, stairs, and countertops.

Finished Floor Guard is a temporary floor protection covering made by Pro-Tect. It protects finished floors during construction, renovation and moving. A latex grip backing holds it in place, so it needs no tape and no adhesive, and the material is breathable and reusable for up to 180 days.
No. Finished Floor Guard stays in place with its latex grip backing and uses no tape and no adhesive. That means nothing sticky touches the floor, there is no tape residue to clean up afterwards, and the covering can be lifted and repositioned whenever you need access to the floor.
Finished Floor Guard is made for finished surfaces, including hardwood floors, stairs, tile, granite, marble and countertops. It is designed for surfaces that are already finished and cured, which is exactly the stage when a renovation or move puts them at risk from tools, debris and foot traffic.
Finished Floor Guard can stay in place for up to 180 days. The material is breathable, which matters on finished floors: moisture vapour is not trapped against the surface while the covering is down, so the floor underneath keeps curing and breathing during a long project.
Yes. Because Finished Floor Guard uses no adhesive, it can be lifted, rolled up and used again on the next job or in the next room. When a project finishes, roll it from one end, store it dry, and unroll it again wherever a finished floor needs protection.
Finished Floor Guard comes in four widths, each 100 feet long: 24 inches at $78, 36 inches at $118, 40 inches at $130, and 48 inches at $156. Choose the width that covers your floor with the fewest seams; wide halls and open rooms suit the 48-inch roll, and stairs and narrow halls suit the 24-inch roll.
No. Finished Floor Guard contains no adhesive and needs no tape, so there is nothing on the floor-facing side that can transfer to the finish. When the job is done you simply lift the covering away; the floor underneath needs no adhesive removal or residue cleaning.
Unroll Finished Floor Guard across the floor, cut it to length, and smooth it into place so the latex grip backing contacts the surface evenly. Overlap edges where two runs meet. There is no taping, spraying or waiting for adhesive to set, so a room can be protected in minutes.
Yes, stairs are one of its listed uses. The latex grip backing helps the covering hold on treads while people and materials move up and down during a project. The 24-inch width is the easiest size to handle on a staircase.
Rosin paper and cardboard have to be taped down, tear under traffic, and are thrown away after one job. Finished Floor Guard holds itself in place without tape, is breathable, and is reusable for up to 180 days, so one roll covers job after job instead of being replaced every time.
For carpet, use Pro-Tect Carpet Protection, a self-adhesive film made for carpeted floors and stairs. Finished Floor Guard is for hard finished surfaces such as hardwood, tile and stone; carpet needs the adhesive film because a grip backing cannot hold on pile. Each product page states the surfaces it is made for.
Pro-Tect products are made by ProTect II Associates, Inc, based at 3215 Commercial Ave, Northbrook, IL 60062. For help choosing the right protection for a surface, call 1-800-545-0826 or email contact@pro-tect.com. Shipping options and delivery times for your order are shown at checkout.

Protect Finished Floors Without Tape or Adhesive

Finished Floor Guard stays put with its latex grip backing, breathes with the floor underneath, and rolls up for the next job — up to 180 days of protection without a sticky side on your hardwood, tile or stone. Available in 24", 36", 40", and 48" widths, each 100 feet long.

Call PRO TECT: 1-800-545-0826

Not sure which width you need? Contact PRO TECT today.